© 2024 House Painting Info . All rights reserved.
Painted water based Kilz over 2 areas on ceiling…repainted with Valspar ceiling paint x 2 coats…both area painted with kiltz are visibly darker with drying for 24 hrs. Do I need to prime areas with another primer?
I used Kilz interior oil based primer and my cut-in borders are noticeably lighter than the rolled areas. I only cut-in small sections at a time so I could paint the walls while the cut-in was damp. Should I cut-in again with the Kilz before applying the semi-gloss latex paint
We are painting our interior walls and ceiling in our two-car garage and a separate single-car garage. The ceilings are 9′ high. Walls are 22.5’x 21’x22.5′. What retail paints are to be avoided and which retail paints are highly recommended? Are the paints at Lowe’s building supply high quality? Are
I painted one wall of my kitchen with an almost-black flat paint. Rollers didn’t leave any marks, etc, but when I passed lightly my clean hand over the well-dried paint my fingers left light marks. I made it worse when I tried to slightly clean it with a soft cloth.
Just painted widow ledge that gets wet during shower.
The area that is cut in with a brush appears to be lighter than the rolled area. Latex low sheen paint. Same can of paint. Could this be do to the type of roller (3/8″ nap, standard cover)
I put one coat of primer on my ceiling in the bathroom allowed it to dry over night, I did a second coat and it cracked in one spot. How do I fix this?
Don’t miss our future updates! Get Subscribed Today!
Don’t miss our future updates! Get Subscribed Today!
© 2024 House Painting Info . All rights reserved.