Bathroom Paint Issue


I painted my bathroom with satin Superpaint from Sherwin Williams. It is paint and primer in one. I painted over existing paint. After applying the second coat, while it was still wet, the paint began peeling off in sheets. It peeled clean off of the drywall. It only did it in some areas, other areas are okay. I don’t know how to fix it without there being lines, and I don’t want the other areas to peel later. Some things I watch say to peel it all off. Other say to leave it and use drywall mud over lines. Please help. Do I need to redo the whole thing?

2 Responses

  1. Obviously you didn’t prepare the surface before hand… which should have been to look it over for holes or cracks or loose paint and repair with Spackle as required… then give the WHOLE room a coat of Pigmented Shellac Sealer Primer… then after about 1-2 hrs, finish coat with a High Grade Semi Gloss Acrylic Paint (don’t use any product that has primer in it… just regular paint) Baths will get EXTREME ware due to high moisture and temperature and need this type of prep before any painting! So start over by doing it like this… and if you don’t know how to Spackle Correctly… read up on it ( my web site has an excellent page on that technique, here is a direct link: ) Good Luck!

  2. Based on the described scenario of the paint peeling off in sheets while still wet after applying the second coat of Sherwin Williams Satin SuperPaint, it is likely that the adhesion between the existing paint and the new layer of paint was insufficient. To address this issue without compromising the overall finish of the bathroom, the following steps can be taken:

    1. **Assess the Damage**: Thoroughly examine the affected areas to determine the extent of the peeling. If it is limited to specific sections, you may not need to redo the entire bathroom.

    2. **Fix Peeling Areas**: Carefully remove the peeling paint by scraping it off gently using a putty knife or paint scraper. Sand the edges to create a smooth transition between the remaining paint and the exposed drywall.

    3. **Prime the Surface**: After removing the loose paint, apply a high-quality bonding primer to ensure better adhesion of the new paint to the surface. This step is crucial to prevent future peeling.

    4. **Repair the Surface**. After the primer has dried apply drywall compound or other patching compounds to any remaining visible edges of paint. This is necessary to hide the damaged areas. Sand smooth and reapply a second coat if needed. Sand the final coat of patching compound and apply a coat of primer to the repair.

    5. **Reapply Paint**: Once the primer has dried as per the manufacturer’s instructions, repaint the affected areas with the Sherwin Williams SuperPaint. Make sure to follow the recommended drying times between coats.

    6. **Blend the Finish**: To avoid visible lines or discrepancies between the repainted areas and the unaffected sections, feather the paint edges by lightly overlapping onto the existing paint. This technique helps create a seamless finish.

    7. **Inspect and Monitor**: After completing the touch-ups, monitor the repainted areas for any signs of peeling or inconsistencies. If you notice any issues, address them promptly to prevent further damage.

    8. **Prevent Future Issues**: To prevent similar peeling problems in other areas, ensure proper surface preparation before painting. This includes cleaning, sanding, and priming the surface to promote better paint adhesion.

    By following these steps meticulously, you can effectively address the peeling paint issue in your bathroom without necessitating a complete redo. However, if the problem persists or worsens, it may be advisable to seek professional assistance to identify any underlying issues with the surface or paint application.

Leave a Reply

Your email address will not be published. Required fields are marked *

House painting Search


Trending posts

No posts found


Don’t miss our future updates! Get Subscribed Today!