Varnish and White Wash Pickling


We have 60+ year old oak paneling in our house. We are not sure if it is varnished or polyurethaned. I also don’t know if the product on the wood is oil-based or not (took a sample to a home improvement chain store and they thought it was) I really want to white wash/pickle it. Can we use chemical deglosser, or do we need to sand? (I am concerned about lead, so if I don’t have to sand, that would be good!)

One Response

  1. At 60 years + old the finish is oil base varnish. Polyurethane is a fairly new finish. Getting a pickled effect will be difficult with the finish on the wood, the new stain will not soak in. Stripping off the varnish is the best way, but it is possible to get the desired effect by applying a pickling stain over the varnish. You will need to experiment to see if the new stain gives you the look you want.

    You can try using the deglosser only. The best is Paso but use whatever is available in your area. Sanding is better than a deglosser. Don't worry to much about lead, this mainly applies to old primers and paints, but you can test for lead. Lead test kits are available at your local paint store.

Leave a Reply

Your email address will not be published. Required fields are marked *

House painting Search

Trending posts

No posts found


Don’t miss our future updates! Get Subscribed Today!