To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
One Response
Yes, epoxy paint will work well. A good epoxy paint will cure to a hard shiny finish, very resistant to cleaners and general use. Additionally, epoxy paints provide a rock-hard finish that is easy to clean and maintain, making them ideal for kitchen cabinets that are subject to daily wear and tear. A good 2-part water based epoxy will be the easiest to use.
**Challenges**
Brushing and rolling. Epoxies can be a bit thick and sticky, adding a little water to water-based epoxies should help, plus you will have a limited amount is time to apply, read the manufacture specs for this information. Epoxy paints are self-leveling, which helps achieve a smooth and glossy finish on wood cabinets, but also means lots of runs and sags if applied to thick.
**Mixing**
Choose an epoxy that has a 50-50 mix ratio. This will make mixing small batches easier. I recommend mixing only enough epoxy to apply 1 coat at a time as this coating will harden in the bucket in just a few hours.
**Preparation**
You still need to follow the basic steps for prep including priming.