Asbestos Siding Painting

share

I have a 1950ish home and my problem is some tiles (which are at both ends of the house at the peaks) on the home are stained a brown color and I am wanting to paint them if I can. The rest of the house is white. I need answers if I can prime and paint them or I have to find a color for the rest of the house to match them. The trim around the windows is brown also.

One Response

  1. Painting asbestos siding can be a tricky task due to the potential health risks associated with disturbing asbestos material. Before attempting to paint asbestos siding, it is crucial to ensure that the siding is not damaged or deteriorating. If the siding is in good condition, painting it can help improve its aesthetics and prolong its lifespan. Here are key steps to consider when painting asbestos siding:

    1. **Safety First**: It is essential to take necessary precautions to protect yourself from asbestos exposure. Wear appropriate personal protective equipment such as gloves, goggles, and a respirator. Make sure to avoid creating dust while working on the siding. NO SANDING

    2. **Surface Preparation**: Thoroughly clean the siding to remove any dirt, debris, or loose paint. Use a mild detergent or a solution of water and trisodium phosphate (TSP) for cleaning. Rinse the siding properly and allow it to dry completely before proceeding with painting. You can use a pressure washer at lower than normal pressures or a garden hose for a simple rinse.

    3. **Priming**: Applying a good quality exterior acrylic bonding primer to your siding is crucial to ensure proper adhesion of the paint. Zinsser 123 will work well. This step also helps to seal the surface and improve the overall finish of the paint job.

    4. **Choosing the Right Paint**: Select a high-quality exterior acrylic paint that is suitable for use on asbestos siding. Acrylic latex paints are often recommended for their durability and flexibility. Choose a color that complements the exterior of your home and is rated for outdoor use.

    5. **Application**: Use a brush or a roller to apply the paint evenly on the siding. Start from the top and work your way down, moving in smooth and even strokes. Ensure that the paint is applied in thin, even layers to avoid drips or runs. Allow each coat to dry completely before applying additional coats.

    By following these steps and taking appropriate safety measures, painting asbestos siding can be done effectively and safely. It is important to remember that if the asbestos siding is damaged or significantly deteriorated, it is best to seek professional help for proper assessment and handling.

Leave a Reply

Your email address will not be published. Required fields are marked *