My wife and I painted latex over oil base paint without priming.
My wife and I painted latex over oil base paint without priming. Now the paint is chipping off. We want to repaint but don’t know if we need to strip it first. What should we do?
My wife and I painted latex over oil base paint without priming. Now the paint is chipping off. We want to repaint but don’t know if we need to strip it first. What should we do?
I applied first coat of exterior latex on our pre primed steel door, I changed my mind on color choice. Must I re-prime the door before repainting?
I painted my fiberglass door with acrylic paint, giving it more than on coat. With the super hot temperatures, the paint bubbled in different places. The paint store recommended I sand over the areas affected, then paint the door with an oil based paint as a primer. Wait at least
What clear coat options do I have for a new fiberglass door that I will be painting? What type of paint can I use for exterior?
I very recently painted an inside bedroom door with eggshell paint. The door had a glossy finish originally and this is an old house (23 yrs.). I sanded the door first, as it was suggested. Someone accidentally put pencil marks on the Swiss Coffee door (I’ve read that this is
My contractor installed new double fiberglass entry doors. Doors are rubbing when opening and closing. Contractor says no more adjustments are possible. Afraid to let him proceed with staining. Can the door edge be lightly sanded to create a smooth operation?
We just panted the interior walls a light sage green. Trim and baseboards are a chocolate brown. What color should I paint the doors?
Last summer/late, I sanded my older wooden garage door exterior then used 2 coats of oil primer before finishing with a very dark Sherwin Williams “Aqua” latex paint. I didn’t paint the inside of the door but did seal all edges/sides. Looked beautiful for a month or so then coastal
I stripped & primed my mahogany entry door and painted it red using Valspar exterior latex. It is blotchy with very uneven coverage & brush strokes. It has raised panels with routed trim applied, so brushing seems necessary. Previous finish was red latex and it was applied with no problem.
Paint is bubbling and cracking while still wet. Paint is Behr latex gloss enamel on a metal door prepared with grabber primer. Is there a solution for this happening?
Don’t miss our future updates! Get Subscribed Today!
Don’t miss our future updates! Get Subscribed Today!
© 2024 House Painting Info . All rights reserved.