Our home is 2 years old. The problem I am having is with the red wood railing around the deck. Most of the sapping has stopped but the paint is still chipping. I am using Sherwin Williams quick seal 350 hs alkyd stain blocker primer which is supposed to block

I stained my deck two days ago. I applied it with a paint roller. When I was done I was doing research and read that you should go over everything with a brush. So I started to put a second coat on. It is the summer and was getting really

Can I use a water based stain to restain my deck after it has already been stained 3yrs ago with an oil based stain?

My painted deck is peeling badly. How can it be refinished? It was painted with SW Amourseal-acrylic. Only the floor is painted. The deck is made of CVC pressure treated lumber. The side rails are stained with solid color stain. I would prefer to have the floor a solid stain

Vertical and horizontal wood (old P.T. wood.) My question is; I used pressure treated wood that was clear coated on a deck and in garden as trim. I stained it after I was told that’s all I had to do. 2 years latter it pealed. So I stripped it. Then

Our deck is about 10 years old. It was built and painted by the previous owners of the house and needs repainting or staining. I would like to sand and stain it but am not sure how to start because the boards are ridged, rather than flat. I think they

I have been asked to re-do the floor of a screened-in porch. It had been previously painted and an acrylic coat put over that. Would I have to sand it to re-paint or can I prime then paint. Also, what would you charge for this project. It is 14X24

I stained a new deck 3 yrs ago with Sikkens translucent. It is time to reapply a stain. I’ve heard that you should NOT sand a deck to remove the former stain because it closes the pours of the wood and prevents the stain from penetrating as it should. They

Painting an outside deck with oil base. What temp is worst not to work in?

We painted our porch. Noted some dull areas a few days later. We applied a second coat of black paint. It rained that night and now that area has turned milky white. How do I fix this?