My walls have been painted several times with light blue and white. Now I’m trying a red-rust color and have roller marks – it looks horrible. What can I do?

My house is about 30 years old. I recently painted over exiting off-white trim in two rooms with white alkyd enamel. The new white paint turned yellowish tan in about 4 weeks. I then painted over the discolored alkyd enamel with a coat of Zinsser shellac based primer. The bleed

Bought 2 pre-hung doors and stained them with Minwax. Easy job, but now the wife wants to paint over the stain. Can this be done with regular latex interior paint?

I did some minor repairs to a room prior to painting, and after wiping the walls down with a damp cloth I rolled the paint on (latex satin finish) and after a short time bubbles appeared in various places. Some were very small, and others may have been the size

I always use painter’s tape especially when painting with dark colors. I gently removed the tape and it tore off a bunch of the paint. I have been told to leave it until the paint is bone dry and I’ve also been told to remove it immediately after applying the

Can I use a water based paint over an oil base primer?

I have painted my kitchen walls and ceiling several times and after a couple of years I start to see the studs and sheetrock screws bleeding through the paint. I have used Kilz on the ceiling but it still bleeds through over time. This is an old house but this

I want to paint my brick fireplace. How do I do this?

We primed and two top coats of semi gloss latex paint. They layed a couple of doors against the wall and when they moved them the paint peeled off. The paint will come off in sheets and takes off the white top layer of paper, but leaves the brown paper.