To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
One Response
Is the Kilz chipping off the surface, not adhering well? Or is the chip very thick; varnish, primer and paint?
If the chip is down to the wood; Well, after 50 years the varnish, or whatever, is very hard and brittle. There isn't anything you can about it without stripping the doors and starting over.
If the Kilz isn't adhering well then either a different primer is needed or more prep (sanding and cleaning). I would still stick with an oil based primer. But, more sanding will help any primer stick. Another major cause of primer failure is surface contaminates. After sanding wipe down the door surface with denatured alcohol, this will help clean the surface before priming.