Painting new cedar shingles.


The southern side of our church has cedar shingles which were installed in 1955. They are split and the paint is peeling. We have attempted to patch, brush and paint this siding over the years but the shingles are in bad shape and we plan to install new cedar shingles.

The question is what type of primer do we use and how should we apply it? We thought it made sense to have the shingles dipped in the paint before it is shipped by the manufacturer (we believe this is possible). The lumber yard where the shingles are to ordered felt that the “shingles wouldn’t breathe if that was done. Painters have said that the primer should be applied to the back of the shingles before installation and then paint the rest of the shingles after installation. Different brands of primer have been recommended. After all the expense to purchase the cedar shingles, felt paper, nails and the labor, we want the paint to last. Please let us know what type of primer to use and how it should be applied?

One Response

  1. Back Prime (prime the back side) of the shingles using an exterior wood oil base primer, use Sherwin Williams Products… and while at it, prime the front sides and edges with the same material… then after installing the shingles, finish coat with Sherwin Williams A-100 Acrylic… using the color you want (one coat)… brush & roll is better than spraying and will give a thicker, more durable finish…

Leave a Reply

Your email address will not be published. Required fields are marked *

House painting Search

Trending posts

No posts found


Don’t miss our future updates! Get Subscribed Today!