We have eighteen windows in a new addition on our home. The stain turned out too yellowy-orange and now we’re faced with what to do to rectify this situation. (They are already finished with two coats of poly.) No one will strip them because there are two many and we don’t have the time nor the expertise to do this. Painting isn’t an option as the room is open to the rest of the house which has all stained wood windows, doors, trim, etc.
So, other than tearing them all out and replacing new windows and spending about twelve thousand dollars again, is there anything at all that can be done to make them look more of the brown with slight reddish undertones we thought we were getting? This is our problem, not the stainer’s, but something has to be done. I literally don’t want anyone to come to my house because this room is open to everything and the color looks so bad (really orange especially when the sun is out).
One Response
You do have an option other than stripping. It is a little difficult at first, but doable with a little practice. This will involve sanding, applying one or more coats of gel stain and then reapplying the poly finish coat.
First, do you have the original wood stain used on the windows? This is important as you will need to make a practice board that reflects the wood species, stain color and finish used.
Purchase a 3-4ft trim board that is the same type of wood as the windows, probably pine or fir. Now, stain and finish it the same as the windows. Allow this to dry for 3-4 days. Take this board with you to your local independent paint store and look at the available gel stain colors. See if the sales person will apply a little to the board so you can see how the stain changes the original color.
You won't be able to have the "perfect" color you want. But the original stain color can be changed or pushed into a new direction. The original stain color will affect the new gel stain color, its look or appearance. Having some small samples applied to the practice board will show this and help you determine the right gel stain for your needs.
Once you have a gel stain color, use the board for practice. Carefully sand the practice board with a fine sanding sponge, 180 grit, dull the surface. Now wipe off the dust and practice applying the gel stain with a very good quality white china bristle brush, 2 inch wide should work nicely. If you don't like how you are applying the stain, simply wipe it off with a clean rag and a little paint thinner before it dries and try again.
HINT- Use quick, short single direction strokes of the brush with a minimum of stain. Blending will be the most difficult part.
It is important to practice on this trim board before trying this technique on the actual windows. Once you have this down you can transform the color of your windows. The gel stain will need 2 days of drying time before applying the poly finish.
This same technique can be used on any stained and finished surface, including cabinets.