I jumped the gun and painted door without sanding or using a primer. I also had to close door as had to leave house. When I opened of course the edges had marred. I then rubbed with finger and started to peel . It looks like I could peel off

I recently purchased a used coffee table for a very good price. On one side near the bottom the color has worn off from people putting their feet on the table. I plan to use Formby’s Refinisher and would like to know if I can stain the entire table afterwards.

I stained my door and put 3 coats of polyurethane on it last year. Now little bits of stain have worn away. After I strip it and before I stain it will I have to prime it? What kind of polyurethane should I use that will last?

We have old double hung windows that were excessively caulked and painted shut. On the inside the caulk is mildewed, ugly and spread too far on to the window panes. I want to; #1 remove and replace the old caulk around the glass, #2 repaint the inside wood and #3

My house is a beige color with a mocha brown trim. The front door is stained wood and I want to paint it. Not sure what color? Brick red? Burgundy? Forest Green? Not sure what will go best with the trim.

I have a new fiberglass door and the window trim on it is polypropylene. The stain is not covering the trim the same as the door. I have primered the trim and the door was pre-primered by manufacturer. Now I want to change the entire color on the door because

New kitchen cabinets were painted black and they came out with a sticky feeling. It has been over a week and they are still sticky. Is there anything that will take the stickiness out. Semigloss latex was used.

What color do I paint the inside of a exterior door? The trim around the door is white. Can I paint it dark?

We have painted our bathroom 4 times and each time within a few days the paint bubbles and peels. Then we tried wallpaper, which lasted about 2 weeks before it started to peel. What can we do?