To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
2 Responses
The steps you will need to use is just like any other house; clean, repair, prime, caulk then paint.
Cleaning
First you need to clean up all of the painted surfaces. It looks like the body is stucco, soffits and fascias are plywood and solid wood, and the porch wall is concrete block. The body and porch wall will require some scrubbing with a good soap, TSP (trisodium phosphate) works really well, and maybe some bleach. Bleach will help kill and remove mold. Use a pressure washer, 1500-2000 psi. A scrub brush or stiff broom can help with stubborn areas. It is very important to start with a very clean surface.
Repair
Check out the entire house for rotted or danged areas and repair as needed. Pay special attention to the windows and door frames. Excessive cracks in the body substrate can also be repaired now. Once your house is really clean you can see all of its defects. Also remove all loose paint at this time.
Prime
Once it is clean and repaired you can prime. I would use an acrylic primer on the masonry surfaces. Priming the trim and windows depends on their condition and the original paint plus the type of new paint you will use. Its not a bad idea to prime these areas as well, even if they don't really need it. A good acrylic primer can be used on the trim. If the original paint is oil based use an oil based primer.
Caulk
Seal it up!!! Use a very good caulking to seal the gaps and cracks. Don't try to save money here. I like Dap's Dynaflex 230. It costs more but is worth it. DO NOT USE 100% SILICONE! Only use a high quality paintable caulking. Anyplace that water can get in needs to be sealed. Your biggest enemy is water behind the paint film.
Paint
Now that all of drudgery is finally over you can start to paint. Personally, I would use an elastomeric on the body of your house and an acrylic on the rest. Your choices depends on what is locally available. Paint the soffits and fascias first then the body and finally finish with the details.
Check out <a href="https://project.annexal.com/house-painting-old/exterior-paint-preparation.html">Exterior Preparation</a> and <a href="https://project.annexal.com/house-painting-old/exterior-painting.html">Exterior Painting</a> for more details.
The steps you will need to use is just like any other house; clean, repair, prime, caulk then paint.
Cleaning
First you need to clean up all of the painted surfaces. It looks like the body is stucco, soffits and fascias are plywood and solid wood, and the porch wall is concrete block. The body and porch wall will require some scrubbing with a good soap, TSP (trisodium phosphate) works really well, and maybe some bleach. Bleach will help kill and remove mold. Use a pressure washer, 1500-2000 psi. A scrub brush or stiff broom can help with stubborn areas. It is very important to start with a very clean surface.
Repair
Check out the entire house for rotted or danged areas and repair as needed. Pay special attention to the windows and door frames. Excessive cracks in the body substrate can also be repaired now. Once your house is really clean you can see all of its defects. Also remove all loose paint at this time.
Prime
Once it is clean and repaired you can prime. I would use an acrylic primer on the masonry surfaces. Priming the trim and windows depends on their condition and the original paint plus the type of new paint you will use. Its not a bad idea to prime these areas as well, even if they don't really need it. A good acrylic primer can be used on the trim. If the original paint is oil based use an oil based primer.
Caulk
Seal it up!!! Use a very good caulking to seal the gaps and cracks. Don't try to save money here. I like Dap's Dynaflex 230. It costs more but is worth it. DO NOT USE 100% SILICONE! Only use a high quality paintable caulking. Anyplace that water can get in needs to be sealed. Your biggest enemy is water behind the paint film.
Paint
Now that all of drudgery is finally over you can start to paint. Personally, I would use an elastomeric on the body of your house and an acrylic on the rest. Your choices depends on what is locally available. Paint the soffits and fascias first then the body and finally finish with the details.
Check out <a href="https://project.annexal.com/house-painting-old/exterior-paint-preparation.html">Exterior Preparation</a> and <a href="https://project.annexal.com/house-painting-old/exterior-painting.html">Exterior Painting</a> for more details.