To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
2 Responses
The most likely cause is the way you rolled the paint and you have either no texture on your walls (smooth) or very little. When a paint, especially a quick drying acrylic, is rolled the roller nap leaves a slight stipple. This stipple has a different pattern when rolled up verses down. This difference can show up with a sheened paint like Benjamin Moore Pearl.
When painting smooth walls it is best to "back roll" in a downward direction. Example – Apply your paint in the typical manner, up and down, then drop back and re-roll the section (without rewetting the roller) in a down only pattern. This usually takes care of a roller marks. Applying paint in this manner works best when the paint is applied thickly and not allowed to dry too much before re-rolling.
Also, if the paint is drying too fast add either Floetrol paint conditioner or a splash of water. This also helps reduce roller marks.
The most likely cause is the way you rolled the paint and you have either no texture on your walls (smooth) or very little. When a paint, especially a quick drying acrylic, is rolled the roller nap leaves a slight stipple. This stipple has a different pattern when rolled up verses down. This difference can show up with a sheened paint like Benjamin Moore Pearl.
When painting smooth walls it is best to "back roll" in a downward direction. Example – Apply your paint in the typical manner, up and down, then drop back and re-roll the section (without rewetting the roller) in a down only pattern. This usually takes care of a roller marks. Applying paint in this manner works best when the paint is applied thickly and not allowed to dry too much before re-rolling.
Also, if the paint is drying too fast add either Floetrol paint conditioner or a splash of water. This also helps reduce roller marks.