I have a fiberglass door that has been stained. The stain is to dark. Can it be lightened or removed to start over? The door has been stained for many days.
© 2024 House Painting Info . All rights reserved.
The Practical House Painting Guide
The Practical House Painting Guide
I have a fiberglass door that has been stained. The stain is to dark. Can it be lightened or removed to start over? The door has been stained for many days.
Don’t miss our future updates! Get Subscribed Today!
We are a free house painting information site. We offer great information and advice when it’s time to paint your home.
Don’t miss our future updates! Get Subscribed Today!
© 2024 House Painting Info . All rights reserved.
2 Responses
The only way to lighten the stain color is to remove the existing stain and start over with a lighter color. Fortunately this isn't as hard as you think. You have a couple of choices depending if you applied a clear finish over the stain.
If the door is stained and not finished, use lacquer thinner to dissolve the stain. Work in sections and use a stiff nylon brush to work the lacquer thinner into the embossed texture.
The lacquer thinner will dissolve the stain quickly and also evaporate very fast. You will have to flood an area with the thinner then quickly wipe it with a white rag. Repeat until all of the stain is removed.
If you applied a clear finish to the fiberglass door I recommend using a paint stripper instead of the lacquer thinner. Choose a paint stripper that is appropriate for the type of clear finish you used.
Both of these options should be preformed with the door on sawhorses and with good ventilation.
The only way to lighten the stain color is to remove the existing stain and start over with a lighter color. Fortunately this isn't as hard as you think. You have a couple of choices depending if you applied a clear finish over the stain.
If the door is stained and not finished, use lacquer thinner to dissolve the stain. Work in sections and use a stiff nylon brush to work the lacquer thinner into the embossed texture.
The lacquer thinner will dissolve the stain quickly and also evaporate very fast. You will have to flood an area with the thinner then quickly wipe it with a white rag. Repeat until all of the stain is removed.
If you applied a clear finish to the fiberglass door I recommend using a paint stripper instead of the lacquer thinner. Choose a paint stripper that is appropriate for the type of clear finish you used.
Both of these options should be preformed with the door on sawhorses and with good ventilation.