My old house has lath and plaster walls that have been repainted many times. When the paint peels it exposes the bare, grainy plaster underneath. Do I need to prime this before spackling ? If so, with what? Thanks

Can I paint exterior latex over interior latex paint? We are doing it in our garage for durability reasons.

I have a pre-primed metal exterior door that I have painted. The first side took four coats and looks good. On the opposite side, I put down one coat and let it dry and then applied a second coat about a week later. The second coat looks like it has

I have almost finished painting the outside of the house but have two areas up high out of reach of my 24 foot ladder. I tried to roll it with a long roller but not working due to horizontal siding. I am a little reluctant to go up high on

I have a brand new exterior fiberglass door with a poly finish. I want to change the color. Do I need to sand or otherwise rough up the surface first? I have been told by the manufacturer not to sand it. How can I change the color?

When using a new paint roller, I get lots of loose fibers that come off the roller and ruin the paint job. How do you get rid to the fibers from being pulled off the roller and on to the painted surface?

Is it better to use oil based primer under latex paint? Will it hold up better? This will be used on new wood. Thanks

My project is painting lots of windows 3-4′ wide and 6-8′ tall(6″ trim), doors (6″ trim) and base molding (8″ and 10 “) in a 100 yr. old house that currently has semi gloss paint. Are there any primers that really work where they state you can prime over gloss