To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
The technical storage or access that is used exclusively for statistical purposes.
The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
One Response
Two ideas;
1- You can make a toner by adding tint to some poly and spraying it on. This works to a point as the poly can't hold much tint but it can change the color of finished wood.
2- Apply a coat of gel stain then a coat or 2 of poly. This has the best chance of darkening the oak but is somewhat difficult.
I would try a toner first on a single piece to see if it will get the color your customer wants. To get the toner have a quart of the same poly used slowly tinted and your favorite paint store. Make sure to have a piece of finishes wood to apply samples for experimenting at the store.